Experimental RPM spec file for Elm ME+ 2.5 PLalpha39
exists on
directory.
I do not know rpm, so please do not blame me, if
I wipe your hardisk...
Files are following
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.spec
RPM spec file [Note 1]
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.spec.elm-key-2013old.sig
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.spec.elm-key-2013.sig
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.spec.sig
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.fdr19.src.rpm
Source rpm [Note 2]
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.fdr19.src.rpm.elm-key-2013old.sig
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.fdr19.src.rpm.sig
* Compiled on Linux Mandrake release 7.2
(Linux 2.2, glibc 2.1)
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.mdk7.2.i686.rpm
Package elm binary RPM build on Linux Mandrake release 7.2 [Note 3, Note 4]
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.mdk7.2.i686.rpm.sig
- http://www.elmme-mailer.org/rpm/elm-mod-ME+2.5.alpha39-1.mdk7.2.i686.rpm
Package elm-mod binary RPM build on Linux Mandrake release 7.2 [Note 3]
- http://www.elmme-mailer.org/rpm/elm-mod-ME+2.5.alpha39-1.mdk7.2.i686.rpm.sig
- http://www.elmme-mailer.org/rpm/elm-tls-ME+2.5.alpha39-1.mdk7.2.i686.rpm
Package elm-tls binary RPM build on Linux Mandrake release 7.2 [Note 3, Note 5]
- http://www.elmme-mailer.org/rpm/elm-tls-ME+2.5.alpha39-1.mdk7.2.i686.rpm.sig
* Compiled on Fedora release 19
(Linux 3.14, glibc 2.17, Sendmail 8.14)
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.fdr19.i686.rpm
Package elm binary RPM build on Fedora release 19 [Note 6]
- http://www.elmme-mailer.org/rpm/elm-ME+2.5.alpha39-1.fdr19.i686.rpm.sig
- http://www.elmme-mailer.org/rpm/elm-mod-ME+2.5.alpha39-1.fdr19.i686.rpm
Package elm-mod binary RPM build on Fedora release 19 [Note 6]
- http://www.elmme-mailer.org/rpm/elm-tls-ME+2.5.alpha39-1.fdr19.i686.rpm
Package elm-tls binary RPM build on Fedora release 19 [Note 6]
- http://www.elmme-mailer.org/rpm/elm-debuginfo-ME+2.5.alpha39-1.fdr19.i686.rpm
Package elm-debuginfo binary RPM build on Fedora release 19 [Note 6, Note 7]
* Notes
Note 1:
- rpmbuild elm-ME+2.5.alpha39-1.spec warns that "prereq is
deprecated", but that is required on Linux Mandrake release
7.2 where older rpm -package is build.
Note 2:
- elm-ME+2.5.alpha39-1.fdr19.src.rpm is signed internally with
GPG key elm.key.2013.asc (A54BE3BC 2013-10-20).
Note 3:
- elm-ME+2.5.alpha39-1.mdk7.2.i686.rpm and
elm-*-ME+2.5.alpha39-1.mdk7.2.i686.rpm are signed internally
with GPG key elm.key.2013old.asc (825FDF78 2013-10-26).
Note 4:
- elm-ME+2.5.alpha39-1.mdk7.2.i686.rpm is compiled agaist
Sendmail 8.13 (not from Mandrake distribution).
Note 5:
- elm-tls-ME+2.5.alpha39-1.mdk7.2.i686.rpm do not load/work on
Mandrake 7.2, because openssl library misses RAND_egd_bytes
function.
Note 6:
- elm-ME+2.5.alpha39-1.fdr19.i686.rpm and
elm-*-ME+2.5.alpha39-1.fdr19.i686.rpm are signed internally
with GPG key elm.key.2013.asc (A54BE3BC 2013-10-20).
Note 7:
elm-ME+2.5.alpha39-1.spec do not have %package debuginfo, but
rpmbuild -ba elm-ME+2.5.alpha39-1.spec build
elm-debuginfo-ME+2.5.alpha39-1.fdr19.i686.rpm anyway.
* Signatures
{file}.sig PGP signature (old key pubkey.asc, EA5A2379 1996-04-23)
{file}.elm-key-2013.sig GPG signature (key elm.key.2013.asc, A54BE3BC 2013-10-20, expires: 2018-10-19)
{file}.elm-key-2013old.sig GPG signature (key elm.key.2013old.asc, 825FDF78 2013-10-26, expires: 2018-10-25)
* Installation
Package elm-mod includes libelmme-iconv.so and libelmme-smtp.so. And
package elm-tls includes libelmme-tls.so.
Installation loses mailer = submission setting from global
/usr/local/lib/elm.rc, because when elm package rewrites elm.rc,
submission mailer is not available. It becomes from elm-mod package.
However failed values of /usr/local/lib/elm.rc are saved to
/usr/local/lib/elm.rc.old-values file during installation.
Global setting mailer = submission is restored from
/usr/local/lib/elm.rc.old-values file, when package elm-mod is
installed.
* Configuration
Following files (if exists) are rewritten by elmconfwriter on
installation:
- /usr/local/lib/elm.rc
- /usr/local/lib/elm.mimecharsets
- /usr/local/lib/elm.mimetypes
- /usr/local/lib/elm.terminalinfo
- /usr/local/lib/elm.iso2022sets
- /usr/local/lib/elm.mailservices
- /usr/local/lib/elm.aliases
- /usr/local/lib/elm.mailinglists
Spec file compiles elm for binary distribution, so you must edit
/usr/local/lib/elm.rc before using Elm ME+ 2.5. Following variables may
need to be modified on elm.rc:
- mailer
- hostdomain (this is usually needed)
- hostfullname
- hostname (usually this is not needed)
- mailname (default values is generated from other values)
- name-resolution (controls default values of hostdomain,
hostfullname, hostname, mailname)
For re-generation of following file, old information (if exists) is
used:
- /usr/local/lib/elm.rc
On installation following existing files are merged with new values:
- /usr/local/lib/elm.terminalinfo
- /usr/local/lib/elm.mimetypes
- /usr/local/lib/elm.mimecharsets
- /usr/local/lib/elm.mailservices
- /usr/local/lib/elm.mailinglists
- /usr/local/lib/elm.aliases
- /usr/local/lib/elm.iso2022sets
Old values from /usr/local/lib/aliases.text are converted to
/usr/local/lib/elm.aliases and /usr/local/lib/aliases.text is renamed to
/usr/local/lib/aliases.text.OLD.
On installation new values without merging are written to following
files:
- /usr/local/lib/elm.aliases.NEW
- /usr/local/lib/elm.mailinglists.NEW
- /usr/local/lib/elm.mailservices.NEW
- /usr/local/lib/elm.mimecharsets.NEW
- /usr/local/lib/elm.mimetypes.NEW
- /usr/local/lib/elm.terminalinfo.NEW
- /usr/local/lib/elm.iso2022sets.NEW
SUMMARY: This release adds elmiso2022sets -command and installs global
elm.iso2022sets file. This release changes error handling on
Content-Type and Content-Disposition header -fields. This
release adds "Mail Sending Screen" for submission -mailer and
"sending-display=yes" (or "...=no") -parameter to "mailer"
option of global elm.rc. "special-use-domains-blacklist"
-option is added to elmrc. Keywords "imaps", "pops" and
"smtps" are added to mail.services. This release adds some
support for non-standard imaps -URLs. This release adds SIZE
support to submission -mailer. Then also some other changes
and bug fixes are included.
Elm ME+ 2.5 PLalpha39 changelog
Changes on Elm ME+ 2.5 PLalpha39 compared with Elm ME+ 2.5 PLalpha38
--------------------------------------------------------------------
SUMMARY: This release adds elmiso2022sets
-command and installs global elm.iso2022sets
file. This release changes error handling on
Content-Type and Content-Disposition header
fields. This release adds "Mail Sending
Screen" for submission -mailer and
"sending-display=yes" (or "...=no") -parameter
to "mailer" option of global elm.rc.
"special-use-domains-blacklist" -option is
added to elmrc. Keywords "imaps", "pops"
and "smtps" are added to mail.services.
This release adds some support for
non-standard imaps -URLs. This release
adds SIZE support to submission -mailer.
Then also some other changes and bug
fixes are included.
- Possibly fixed case where last line of
~/.elm/iso2022.sets was not (always) parsed
if there was not newline on last line.
- Do not free null pointer / string on
browser_folder_from_imap(). Fixes crash
SIGNAL PANIC in signals.c:144:segv_signal
>>>
Segment Violation signal!
Call stack: 496D66 80E3A81 283400 170216 15FE2F
continues: 15CCF8 80A9D3C 80AA186 80B0C55 809072B
continues: 6EABF6 8060751
backtrace:
/usr/local/lib/libelmme-base.so.1.1.38(panic+0x1e8)[0x496d66]
elm(segv_signal+0x84)[0x80e3a81]
[0x283400]
/usr/local/lib/libelmme-mbox.so.1.1.38(+0x36216)[0x170216]
/usr/local/lib/libelmme-mbox.so.1.1.38(+0x25e2f)[0x15fe2f]
/usr/local/lib/libelmme-mbox.so.1.1.38(folder_from_dir_item+0x104)[0x15ccf8]
elm[0x80a9d3c]
elm(initialize_mailbox+0x390)[0x80aa186]
elm(main_messages_menu+0xb1)[0x80b0c55]
elm(main+0xbbd)[0x809072b]
/lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe6)[0x6eabf6]
elm[0x8060751]
- Added elmiso2022sets -command.
- Added struct iso2022_map_conf
- Changed calling convention of dump_iso2022_map()
- parse_iso2022_map() now returns read
map information as struct iso2022_map_conf
- Added struct iso2022_mapinfo
- Added free_iso2022_map_conf(), malloc_iso2022_map_conf()
- Added refcounting to struct iso2022_mapinfo
- Added free_iso2022_mapinfo(), inc_iso2022_mapinfo_refcount()
- Added free_iso2022_map_list();
- Changed some struct iso2022_setid matching rules on
lib/iso2022.c (on give_iso2022_index(),
find_iso2022_map_spec() and loc_setid()).
- Added call of free_aliases_map() to elmaliases-write
- Added call of free_charset_map() to elmcharset
- Added call of free_mlist_conf() to elmmailinglists
- Added call of free_mail_services_conf() to
elmmailservices
- Added call of free_mime_types_map() to elmmimetypes
- Added call of free_terminal_map() to elmterminal
- Possible fix to read_map_format_a()
- Moved dump_iso2022_map() from lib/iso2022.c to
lib/misc/iso2022.c
- Changed calling convention of dump_iso2022_map()
- Fixed doc-info dependency on Makefile-1.SH or
or info-list dependency on doc/Makefile.SH. This is
used on cleanup-config target on Makefile-1.SH.
- Possible fix to add_MIBenum()
- Possible fix to iso2022_add_char()
- Changed find_iso2022_map_spec so that it match
map's with any bank if match with given bank
is not found.
- Added doc/iso2022.sets with bank-94 4/10
- Added ISO-2022-JP to doc/mime.charsets (with
incomplete map definition).
- Added ISO-2022-JP-2 to doc/mime.charsets (with
incomplete map definition).
- "This problem has been around about as long as
I can remember. Occasionally when I try to forward
or bounce a message I get a segfault because something
goes wrong with elm reading the mime code."
Reported by: Robert Brose
> Fixed error handling on remail_multipart().
- Report error if type on Content-Type
header field is empty.
- Report error if major type or subtype
on Content-Type header field is empty.
- Changed unicode_is_special() so that '<' ,
'@', '>' are always special, not only
when TOK_mail is given.
- Changed unicode_is_special() so that '?'
is special if TOK_mime is given
- Report error if major type or subtype
on Content-Type header field includes
non-ascii, space, control or MIME
special characters.
- Report error if disposition on
on Content-Disposition header field
includes non-ascii, space, control or MIME
special characters, or if it is empty.
- Report error if mime param name
on Content-Type or Content-Disposition
header field includes non-ascii, control
or MIME special characters.
- Added display about failed addresses
which is used with "mailer = submission".
* This is "Mail Sending Screen" which is displayed
when mail sending is in progress. This is
incompatible with "background-wait-time" elmrc
option (not used with "mailer = submission").
This is enabled with "sending-display=yes" or
disabled with "sending-display=no" option.
- "sending-display" mailer option is available
with mailer types "unknown", "sendmail",
"execmail", "submission" and "sendmail-bs".
Per address status is only available with
mailer types "submission" and "sendmail-bs".
- "Mail Sending Screen" is enabled by default
with mailer types "submission" and "sendmail-bs".
This screen allows saving failed mail to
~/Canceled.mail.dir/ (if c)ancel mail
is selected) or e)dit again (and resend).
Pressing ENTER gives default action, which
is same as "Mail Sending Screen" is
not enabled. Default action does not
save failed mail to ~/Canceled.mail.dir/.
- Page Up and Page Down and Cursor Up and Down
keys changes recipient list on "Mail Sending
Screen" when question is prompted. And
Ctrl-C (interrupt character) cancels
(interrupts) sending of mail when question
is prompted on "Mail Sending Screen".
- Changes return value of verify_transmission()
- Changes mail()
- Added indent to struct pager_range
- Added get_pager_range_indent(),
get_pager_range_change()
- Changed state_add_simple_pager_range(),
stringbuffer_add_simple_pager_range()
- Added find_pg_wrap_info()
- Allow NULL range on set_out_state_line_pager_range()
- Changed give_commands_help(). Now command
help uses indent from struct pager_range
for command description column.
- Fix for handle_common (on debug.c)
- Removed split_word() from src/strings.c
- Removed argv_from_to() from src/strings.c
- Changed menu_print_center() on src/out_utils.c
- Allow menu_header_change(..., header_current,
HEADER_NO_CURRENT) as special case
- Added missing menu_header_change_item() to
src/screen/header.c
- Added support for non-standard imaps
(IMAP over SSL) to user's .elm/mail.services
or global elm.mailservices -file.
Normally Elm ME+ uses imap or pop
on standard port and then possibly
negotiates TLS. Keyword "imaps" on
user's .elm/mail.services or global
elm.mailservices -file changes
port and starts TLS (or SSL) first.
NOTE: Keyword "imaps" should only used when
regular imap -port is blocked.
- Added support for non-standard pop3s
(POP over SSL) to user's .elm/mail.services
or global elm.mailservices -file.
Normally Elm ME+ uses IMAP or POP
on standard port and then possibly
negotiates TLS. Keyword "pops" on
user's .elm/mail.services or global
elm.mailservices -file changes
port and starts TLS (or SSL) first.
NOTE: Keyword "pops" should only used when
regular pop3 -port is blocked.
* Consider using "verify-tls-certificate"
(and "require-tls-peer-name") with
"imap" / "imaps" and "pop" / "pops"-keywords,
if trust is required (with "imap" and "pop"
-keywords STARTTLS / STLS -command is used).
> These requires that
use-connect-library = tls
is used.
> Keywords "imaps", STARTLS of "imap"
"pops" and STLS of "pop" defaults
to tls (not ssl). This can changed with
tls:starttls-version=ssl
or
tls:tls-version=ssl
( tls:starttls-version=none disables
usage of ssl and tls. )
- Imap URLs like
imap://user@full.hostname/inbox
do not match "imaps" -keyword on
user's .elm/mail.services or
global elm.mailservices -file.
- Unified common code from imap_STARTTLS_handler()
of shared_libs/tls/imap.c, pop_STLS_handler()
of shared_libs/tls/pop.c and smtp_STARTTLS_handler
of shared_libs/tls/smtp.c to ra_wrap_tls()
of shared_libs/tls/remote.c.
- Added STFLAG_service_type() to lib/service_list.c
- Removed IMAP_SERVICE, POP_SERVICE, SUBMISSION_SERVICE
and SMTP_SERVICE from lib/service_list.c
- Changed locate_from_cache() on lib/mbox/connection.c
- Added is_similar_service_entry() to lib/service_list.c
- Added give_service_entry2() to lib/service_list.c
- Fixed service entry selection on
url_make_connection_imap()
- "However, on a Suse Linux Enterprise Server 11 SP 3
(with installed 32-bit compatibility package
glibc-devel-32bit) I encountered problems because
configure chose the 32-bit version of libcrypt instead
of the necessary 64-bit version, thus resulting in a
linker error:
i386 architecture of input file
`/usr/lib/libcrypt.a(sha512.o)' is incompatible with
i386:x86-64 output"
Reported by: Dr. Rainer Kaluscha
> Added /usr/lib64 on search path if compiler
produces 64-bit output
* This also changes default shared library location.
- Added support for non-standard smtps
(SMTP over SSL) to user's .elm/mail.services
or global elm.mailservices -file.
Normally Elm ME+'s shared library
libelmme-smtp.so uses submission or smtp
on standard port and then possibly
negotiates TLS. Keyword "smtps" on
user's .elm/mail.services or global
elm.mailservices -file requires
explicit port definition and starts TLS
(or SSL) first.
WARNING: Originally port 465 was reserved
for smtps, but this was revoked
and that port is now reserved for
"URL Rendesvous Directory for SSM"
instead.
> Usually keywords "smtp" or "submission"
are better here.
- Added some support non-standard imaps -URLs.
Support is similarly limited than is support
of imap -URLs. Basically only imap mailbox
can be specified, not individual message or
list of messages (search result).
That is like
imaps://user@full.hostname/inbox
- Imaps URLs do not match "imap" -keyword on
user's .elm/mail.services or
global elm.mailservices -file.
- Fixed imap: -URL handling so that
capabilities are handled and therefore
handle STARTTLS.
- Free haliases -array on setup_names()
- Simplified expand_dt_path()
- Free pager_range -vector on sb_free_file()
- Fix condition on cmd_on_statlist()
- Free path element on dt_PATH_free_option()
- Free mem element on sb_free_mem()
- Free pager_range -vector on sb_free_mem()
- Added support of SIZE extension to
Elm ME+'s shared library libelmme-smtp.so.
Now SIZE=xxx is added to MAIL -command's line
if SIZE is mentioned on EHLO response.
* If "Mail Sending Screen" is available
when message size is bigger than allowed
limit of SIZE on EHLO response, user
is prompted. This allows saving
mail to to ~/Canceled.mail.dir/ (if c)ancel
mail is selected) or e)dit again (and resend).
Pressing ENTER gives default action, which
is same as "Mail Sending Screen" is
not enabled. Default action tries
send mail anyway.
- Message size and possible size limit
are shown on "Mail Sending Screen".
- Added "special-use-domains-blacklist" elmrc option.
Domain names given on list are not acceptable
as server names or as mail addresses.
RFC 6761: Special-Use Domain Names
* If domain name is given as ".domain" then it
blacklists names under that domain. If name
is given as "domain" then also "domain"
itself (and names under it) are blacklisted.
* Mail addresses with domain names given
on "special-use-domains-blacklist" are removed
from recipients list.
New elmrc option:
special-use-domains-blacklist
New tools:
elmiso2022sets
New files:
utils/elmiso2022sets.c
lib/misc/iso2022.c
doc/elmiso2022sets-info
doc/iso2022.sets
ConfTool/GenIso2022sets
charset/MAPPINGS/JIS/JIS0201.TXT
doc/elmiso2022sets.1
src/snd_display.c
src/def_sndmail.h
shared_libs/tls/remote.c
/ Kari Hurtta
|
|